Publications

Authored Books

Bakhshi-Jooybari, M., Gorji, A, Elyasi, M., 2012. Developments in Sheet Hydroforming for Complex Industrial Parts, in: Kazeminezhad, M., Metal Forming – Process, Tools, Design. InTech, Chapter7.

Translated Books

Bakhshi-Jooybari, M., Hojati, M.H., 2001. Principles of Metal Manufacturing Processes. Beddoes, J., Bibby, M.J. Mazandaran University Publications.

Hojati, M.H., Bakhshi-Jooybari, M., Hosseinipour, S.J., 2006. Fundamentals and Applications. Altan, T., Negile, G., Shen, G. Mazandaran University Publications.

Bakhshi-Jooybari, M., Hosseinipour, S.J., Damirchi, A., 2006. Mechanics of Sheet Metal Forming. Marciniak, Z., Duncan. J.L., Hu, S.J. Mazandaran University Publications.

Yazdi, M. S., Bakhshi-Jooybari, M., Gorji, H., Shakeri, M., & Khademi, M. (2018). Investigation of Forming Cylindrical Parts in a Modified Hydrodynamic Deep Drawing Assisted by Radial Pressure With Inward Flowing Liquid. Journal of Manufacturing Science and Engineering, 140(3), 031007.

Khosrojerdi, E., Bakhshi-Jooybari, M., Gorji, A., & Hosseinipour, S. J. (2017). Experimental and numerical analysis of hydrodynamic deep drawing assisted by radial pressure at elevated temperatures. The International Journal of Advanced Manufacturing Technology, 88(1-4), 185-195.

Naghibi, M. F., Gerdooei, M., & Jooybari, M. B. (2016). Experimental and numerical study on forming limit diagrams of 304 stainless steel tubes in the hydroforming process. Journal of Materials Engineering and Performance, 25(12), 5460-5467.

Yaghoobi, A., Bakhshi-Jooybari, M., Gorji, A., & Baseri, H. (2016). Application of adaptive neuro fuzzy inference system and genetic algorithm for pressure path optimization in sheet hydroforming process. The International Journal of Advanced Manufacturing Technology, 86(9-12), 2667-2677.

Kolahdooz, A., Nourouzi, S., Bakhshi Jooybari, M., & Hosseinipour, S. J. (2016). Experimental investigation of the effect of temperature in semisolid casting using cooling slope method. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 230(4), 316-325.

Montazeri, S., Gorji, A., & Bakhshi, M. (2016). A new method for compression bending of thin-walled tubes in hydro-bending process. The International Journal of Advanced Manufacturing Technology, 85(1-4), 557-571.

Mohammadtabar, N., Bakhshi-Jooybari, M., Hosseinipour, S. J., & Gorji, A. H. (2016). Feasibility study of a double-step hydroforming process for fabrication of fuel cell bipolar plates with slotted interdigitated serpentine flow field. The International Journal of Advanced Manufacturing Technology, 85(1-4), 765-777.

Modanloo, V., Gorji, A., & Bakhshi-Jooybari, M. (2016). Effects of forming media on hydrodynamic deep drawing. Journal of Mechanical Science and Technology, 30(5), 2237-2242.

Yaghoobi, A., Gorji, A., Bakhshi-Jooybari, M., & Baseri, H. (2016). Artificial intelligence approach to predict thinning in the hydroforming process. Advances in Materials and Processing Technologies, 2(2), 252-257.

Belali-Owsia, M., Gorji, A. H., & Bakhshi-Jooybari, M. (2016). Modelling the failure behaviour of magnesium alloy sheet forming at warm temperatures by using new hybrid ICA-ANFIS model. Advances in Materials and Processing Technologies, 2(1), 103-114.

Modanloo, V., Gorji, A., & Bakhshi, M. (2016). Experimental Investigation and Simulation of The Effect of Fluid Viscosity on Sheet Forming in Hydroforming.

Salahshoor, M., Gorji, A., & Bakhshi-Jooybari, M. (2015). The study of forming concave-bottom cylindrical parts in hydroforming process. The International Journal of Advanced Manufacturing Technology, 79(5-8), 1139-1151.

Belali-Owsia, M., Bakhshi-Jooybari, M., Hosseinipour, S. J., & Gorji, A. H. (2015). A new process of forming metallic bipolar plates for PEM fuel cell with pin-type pattern. The International Journal of Advanced Manufacturing Technology, 77(5-8), 1281-1293.

Mousavipour, R., Gorji, A., & Bakhshi, M. (2015). Optimization of the Initial Blank Shape in hydroforming Double-Stepped Parts.

Salahshoor, M., Gorji, A., BAKHSHI, M., & BAKHSHI, J. M. (2014). Investigation of the effects of pressure path and tool parameters in hydrodynamic deep drawing.

Teimouri, R., Baseri, H., Rahmani, B., & Bakhshi-Jooybari, M. (2014). Modeling and optimization of spring-back in bending process using multiple regression analysis and neural computation. International Journal of Material Forming, 7(2), 167-178.

Kolahdooz, A., Nourouzi, S., Jooybari, M. B., & Hosseinipour, S. J. (2014). Experimental investigation of thixoforging parameters effects on the microstructure and mechanical properties of the helical gearbox cap. Journal of Mechanical Science and Technology, 28(10), 4257-4265.

Yaghoobi, A., Baseri, H., Bakhshi-Jooybari, M., & Gorji, A. (2013). Pressure path optimization of hydrodynamic deep drawing of cylindrical-conical parts. International Journal of Precision Engineering and Manufacturing, 14(12), 2095-2100.

Zareh, B., Gorji, A. H., Bakhshi, M., & Nourouzi, S. (2013). Study on the effect of forming parameters in sheet hydrodynamic deep drawing using fem-based Taguchi method. International Journal of Advanced Design and Manufacturing Technology, 122 (6), 87-99.

Shamsi-Sarband, A., Hosseinipour, S. J., Bakhshi-Jooybari, M., & Shakeri, M. (2013). The Effect of Geometric Parameters of Conical Cups on the Preform Shape in Two-Stage Superplastic Forming Process. Journal of materials engineering and performance, 22(12), 3601-3611.

Hoseinpour, A. R., Shaikhzadeh Najar, S., & Bakhshi Jooybari, M. (2012). The effect of air-jet nozzle structural parameters on new cotton rotor-jet spun yarn properties. Journal of The Textile Institute, 103(6), 595-603.

Baseri, H., Rahmani, B., & Bakhshi-Jooybari, M. (2012). Predictive models of the spring-back in the bending process. Applied Artificial Intelligence, 26(9), 862-877.

Gorji, A., Alavi-Hashemi, H., Bakhshi-Jooybari, M., Nourouzi, S., & Hosseinipour, S. J. (2011). Investigation of hydrodynamic deep drawing for conical–cylindrical cups. The International Journal of Advanced Manufacturing Technology, 56(9-12), 915.

Gorji, A., Alavi-Hashemi, H., Bakhshi-Jooybari, M., Nourouzi, S., & Hosseinipour, S. J. (2011). Investigation of hydrodynamic deep drawing for conical–cylindrical cups. The International Journal of Advanced Manufacturing Technology, 56(9-12), 915.

Gorji, A. H., Bakhshi, M., Nourouzi, S., Hosseinipour, S. J., & Mohammad-Alinejad, G. (2011). Finite Element Simulation and Experimental Study of the Effect of Cone Parameter on Thickness Distribution in Hydroforming of Conical-Cylindrical Cups. In Advanced Materials Research (Vol. 189, pp. 2634-2637). Trans Tech Publications.

Elyasi, M., Zoghipour, P., Bakhshi, M., & Gorji, A. H. (2011). Analysis of Geometry and Thickness Distribution in a New Hydroforming Die for Cylindrical Stepped Tubes.

Baseri, H., Bakhshi-Jooybari, M., & Rahmani, B. (2011). Modeling of spring-back in V-die bending process by using fuzzy learning back-propagation algorithm. Expert Systems with Applications, 38(7), 8894-8900.

Baseri, H., Rahmani, B., & Bakhshi-Jooybari, M. (2011). Selection of bending parameters for minimal spring-back using an ANFIS model and simulated annealing algorithm. Journal of Manufacturing Science and Engineering, 133(3), 031010.

Teimouri, R., Baseri, H., Rahmani, B., & Bakhshi-Jooybari, M. Modeling and optimization of springback in bending process using multiple regression analysis and intelligent computation. Int. J. Mater. Form. DOI, 10, 1007.

Teimouri, R., Baseri, H., Rahmani, B., & Bakhshi-Jooybari, M. Modeling and optimization of springback in bending process using multiple regression analysis and intelligent computation. Int. J. Mater. Form. DOI, 10, 1007.

Rezaei Shahreza, A., Behravesh, A. H., Bakhshi Jooybari, M., & Soury, E. (2010). Design, optimization, and manufacturing of a multiple‐thickness profile extrusion die with a cross flow. Polymer Engineering & Science, 50(12), 2417-2424.

Shamsi-Sarband, A., Hosseinipour, S. J., & Bakhshi-Jooybari, M. (2010). Theoretical and FEM Investigation of Superplastic Blow Forming in Conical Die. STEEL RESEARCH INTERNATIONAL, 81(9), 651-654.

Hosseinzade, M., Mostajeran, H., Bakhshi-Jooybari, M., Gorji, A. H., Nourouzi, S., & Hosseinipour, S. J. (2010). Novel combined standard hydromechanical sheet hydroforming process. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 224(3), 447-457.

Gorji, A. H., Alavi-Hashemi, H., Bakhshi-Jooybari, M., Mohammad-Alinejad, G., & Nourouzi, S. (2010). Development of hydrodynamic Deep Drawing Assisted by Radial Pressure for Conical-Cylindrical Parts. STEEL RESEARCH INTERNATIONAL, 81(9), 628-631.

Hosseinzadeh, M., Bakhshi-Jooybari, M., Shakeri, M., Mostajeran, H., & Gorji, H. (2010). Application of Taguchi Method in Optimization of New Hydroforming Die Design. Steel Research International, 81(9), 647-650.

Elyasi, M., Bakhshi-Jooybari, M., & Gorji, A. (2010). A new die design for the hydroforming of stepped tubes. International journal of material forming, 3(1), 71-75.

Bakhshi-Jooybari, M., Elyasi, M., & Gorji, A. (2010). Numerical and experimental investigation of the effect of the pressure path on forming metallic bellows. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 224(1), 95-101.

Zahedi, S. A., Goodarzian, H., Okazi, M., & Bakhshi-Jooybari, M. (2010). Investigation of conventional deep drawing and hydroforming deep drawing via experimental and finite element simulation. Indian Journal of Science and Technology, 3(9), 1009-1013.

Elyasi, M., Bakhshi-Jooybari, M., & Gorji, A. (2009). Mechanism of improvement of die corner filling in a new hydroforming die for stepped tubes. Materials & Design, 30(9), 3824-3830.

Elyasi, M., Bakhshi-Jooybari, M., & Gorji, A. (2009). Mechanism of improvement of die corner filling in a new hydroforming die for stepped tubes. Materials & Design, 30(9), 3824-3830.

Bakhshi-Jooybari, M., Rahmani, B., Daeezadeh, V., & Gorji, A. (2009). The study of spring-back of CK67 steel sheet in V-die and U-die bending processes. Materials & Design, 30(7), 2410-2419.

Zahedi, S. A., Shamsi Sarband, A., Gorji, A., Hosseinipour, S. J., & Bakhshi-Jouybari, M. (2009). Theoretical study and finite element simulation of tearing in hydroforming process. Int. J. Appl. Sci, 9, 178-182.

Mazaheri, K., Ebrahimi, A., KADKHODAYAN, M., AKBARY, R., MAEREFAT, M., KARIMDOOST, Y. A., ... & BAKHSHI, J. M. (2009). Experimental Investigation on Effect of Flapping Frequency on Aerodynamic Forces of Ornithopters.

LOH, M. M., BAKHSHI, J. M., MORI, K., FARZIN, M., & HOSSEINIPOUR, S. (2009). EXPERIMENTAL STUDY AND NUMERICAL STUDY OF PULSATING HYDROFORMING OF TUBE IN BOX-SHAPED DIE.

Bakhshi-Jooybari, M., Elyasi, M., Gorji, A., Mohammad-Alinejad, G., Hosseinipour, S. J., & Nourouzi, S. (2009). Investigation of die corner filling in hydroforming of cylindrical stepped tubes using finite element simulation and experiment. In Key Engineering Materials(Vol. 410, pp. 335-343). Trans Tech Publications.

Rahmani, B., Alinejad, G., Bakhshi-Jooybari, M., & Gorji, A. (2009). An investigation on springback/negative springback phenomena using finite element method and experimental approach. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 223(7), 841-850.

Loh-Mousavi, M., Bakhshi-Jooybari, M., Mori, K. I., & Hyashi, K. (2008). Improvement of formability in T-shape hydroforming of tubes by pulsating pressure. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 222(9), 1139-1146.

Loh-Mousavi, M., Mori, K., Hayashi, K., Maki, S., & Bakhshi, M. (2007). 3-D finite element simulation of pulsating T-shape hydroforming of tubes. In Key Engineering Materials (Vol. 340, pp. 353-358). Trans Tech Publications.

Bakhshi-Jooybari, M., Saboori, M., Noorani-Azad, M., & Hosseinipour, S. J. (2007). Combined upper bound and slab method, finite element and experimental study of optimal die profile in extrusion. Materials & design, 28(6), 1812-1818.

Saboori, M., Bakhshi-Jooybari, M., Noorani-Azad, M., & Gorji, A. (2006). Experimental and numerical study of energy consumption in forward and backward rod extrusion. Journal of materials processing technology, 177(1-3), 612-616.

Bakhshi-Jooybari, M., Saboori, M., Hosseinipour, S. J., Shakeri, M., & Gorji, A. (2006). Experimental and numerical study of optimum die profile in backward rod extrusion. Journal of materials processing technology, 177(1-3), 596-599.

Noorani-Azad, M., Bakhshi-Jooybari, M., Hosseinipour, S. J., & Gorji, A. (2005). Experimental and numerical study of optimal die profile in cold forward rod extrusion of aluminum. Journal of materials processing technology, 164, 1572-1577.

Mori, K., Maeno, T., Bakhshi-Jooybari, M., & Maki, S. (2005). Measurement of friction force in free bulging pulsating hydroforming of tubes. Advanced Technology of Plasticity, 192-200.

Khademi, M., Gorji, A., Bakhshi, M., & Yazdi, M. S. (2017). Investigation of Wrinkling in Hydrodynamic Deep Drawing Assisted by Radial Pressure With Inward Flowing Liquid. Procedia Engineering, 183, 65-70.

Hosseini, M. E., Hosseinipour, S. J., & Bakhshi-Jooybari, M. (2017). Theoretical FLD prediction based on MK model using Gurson's plastic potential function for steel sheets. Procedia Engineering, 183, 119-124.

Salahshoor, M., Gorji, A., & Jooybari, M. B. (2016, February). Analysis of the effects of tool and process parameters in hydroforming process. In Proceedings of the 4th International Conference on Electrical, Computer, Mechanical and Mechatronics Engineering (ICE2016), Dubai: Emirates (pp. 4-5).

Elyasi, M., Ghafari, M., & Bakhshi-Jooybari, M. (2014). The Effects of Shape and Tool Material on Aluminum Sheet Spinning. Key Engineering Materials.

Yaghoobi, A., Bakhshi-Jooybari, M., Gorji, A., & Baseri, H. (2014). Optimization of pressure path in sheet hydroforming process using artificial intelligence and simulated annealing. In Key Engineering Materials (Vol. 622, pp. 772-779). Trans Tech Publications.

Shamsi-Sarband, A., Zahedi, S. A., Bakhshi-Jouybari, M., Hossinipour, S. J., & Banabic, D. (2012). Optimizitation Of The Pressure Path In Sheet Metal Hydroforming. Proceedings of the Romanian Academy, 351-359.

Bakhshi-Jooybari, M., Gorji, A., Nourouzi, S., Hosseinipour, S. J., & Mohammad-Alinejad, G. (2012). The Effects of Process Parameters on Forming Conical Parts in Hydrodynamic Deep Drawing Assisted by Radial Pressure. STEEL RESEARCH INTERNATIONAL, 411-414.

Elyasi, M., Khanlari, H., & Bakhshi-Jooybari, M. (2012). Investigation of Load Path Effect on Thickness Distribution and Product Geometry in the Bulge Hydroforming Process. In Applied Mechanics and Materials (Vol. 110, pp. 1477-1482). Trans Tech Publications.

Shamsi-Sarband, A., Hosseinipour, S. J., Bakhshi-Jooybari, M., & Shakeri, M. (2012). Study on The Effect of Friction Coefficient on The Optimized Preform Die Shape in a Multistage Superplastic Forming. STEEL RESEARCH INTERNATIONAL, 1007-1010.

Hashemi, A., Mashhadi, M., Bakhshi-Jooybari, M., & Gorji, A. (2012). Study of the effect of material properties and sheet thickness on formability of conical parts in hydro-mechanical deep drawing assisted by radial pressure. In Advanced Materials Research (Vol. 445, pp. 149-154). Trans Tech Publications.

Mashhadi, M., Hashemi, A., Bakhshi-Jooybari, M., & Gorji, A. (2012). Effect of punch profile on thickness distribution in hydromechanical deep drawing of conical-cylindrical parts. In Advanced Materials Research (Vol. 445, pp. 143-148). Trans Tech Publications.

Shamsi‐Sarband, S., Hosseimpour, S. J., & Bakhshi‐Jooyban, M. (2011, January). Numerical and Experimental Study on Hydrodynamic Deep Drawing of Hemispherical Cups. In AIP Conference Proceedings (Vol. 1315, No. 1, pp. 407-412). AIP.

Gorji, A., Bakhshi‐Jooybari, M., Nourouzi, S., & Mohammad‐Alinejad, G. (2011, January). Forming conical parts with sharp tip in sheet hydroforming process. In AIP Conference Proceedings (Vol. 1315, No. 1, pp. 469-474). AIP.

Norouzi, S., Yaghoubi, A. R., Bakhshi-Jooybari, M., & Gorji, A. (2011). Experimental study of drawing load curves in forming conical parts by hydroforming and conventional deep drawing processes. In Advanced Materials Research (Vol. 291, pp. 556-560). Trans Tech Publications.

Gorji, A., Bakhshi-Jooybari, M., Nourouzi, S., Hosseinipour, S. J., & Mohammad-Alinejad, G. (2011). Finite Element Simulation and Experimental Study of the Effect of Cone Angle on Thickness Distribution in Hydroforming of Conical-Cylindrical Cups. In Advanced Materials Research (Vol. 284, pp. 1385-1388). Trans Tech Publications.

Nourouzi, S., Gorji, A., Bakhshi-Jooybari, M., Hosseinipour, S. J., & Mohammad-Alinejad, G. (2011). The effect of bending radius on thickness distribution in hydroforming of conical-cylindrical cups. In Advanced Materials Research (Vol. 284, pp. 1362-1365). Trans Tech Publications.

Elyasi, M., Khanlari, H., & Bakhshi-Jooybari, M. (2011). Numerical and experimental study of the effect pressure path in tube hydroforming process. In Key Engineering Materials(Vol. 473, pp. 579-586). Trans Tech Publications.

Daiezadeh, V., Elyasi, M., Rahmani, B., & Bakhshi-Jooybari, M. (2011). Experimental and Numerical Investigation of the Effect of Anisotropy on Springback in U-bending Process. In Key Engineering Materials (Vol. 473, pp. 645-652). Trans Tech Publications.

Gorji, A., Bakhshi-Jooybari, M., Norouzi, S., Hosseinipour, S. J., & Mohammad-Alinejad, G. (2011). The effect of process parameters on thickness distribution in hydroforming of conical-cylindrical cups. In Key Engineering Materials (Vol. 473, pp. 176-181). Trans Tech Publications.

Gorji, A., Yaghoubi, A. R., Bakhshi-Jooybari, M., & Norouzi, S. (2011). Thickness Distribution in Conical Parts Formed by Hydroforming and Conventional Multistage Deep Drawing Processes. In Advanced Materials Research (Vol. 189, pp. 2884-2887). Trans Tech Publications.

Hosseini‐Farrash, S. H., Elyasi, M., Bakhshi‐Jooybari, M., & Gorji, A. (2011, January). Improvement of Die Corner Filling in Box‐shape Stepped Tubes Hydroforming. In AIP Conference Proceedings (Vol. 1315, No. 1, pp. 451-456). AIP.

Sepehrizadeh, M., Gorji, A., Zareh, B., Bakhshi‐Jooybari, M., & Norouzi, S. (2011, January). Experimental study and finite element simulation of the effect of cone angle on drawing ratio and thickness distribution in hydroforming of conical‐cylindrical cups. In AIP Conference Proceedings(Vol. 1315, No. 1, pp. 463-468). AIP.

Gorji, A., Bakhshi‐Jooybari, M., Nourouzi, S., & Mohammad‐Alinejad, G. (2011, January). Forming conical parts with sharp tip in sheet hydroforming process. In AIP Conference Proceedings (Vol. 1315, No. 1, pp. 469-474). AIP.

Yaghoubi, A. R., Bakhshi‐Jooybari, M., Gorji, A., & Norouzi, S. (2011, January). Comparison of forming conical parts by hydroforming and conventional deep drawing processes. In AIP Conference Proceedings (Vol. 1315, No. 1, pp. 457-462). AIP.

Bakhshi, M., Gorji, A., Hosseinzade, M., Jamshidi, M., & Mohammad-Alinejad, G. (2010). A new die design for sheet hydroforming of complex industrial parts. In Advanced Materials Research (Vol. 83, pp. 1084-1091). Trans Tech Publications.

Khanlari, H. (2010). Investigation of pressure path effect on thickness distribution of product in hydroforming process of SS316L seamless tubes. In Proc. 13th Int. Conf. Metal Forming" Metal Forming 2010" (pp. 560-563).

Elyasi, M. (2010). A new hydroforming die design for improvement of die corner filling of conical stepped tube. In Proc. 13th Int. Conf. Metal Forming" Metal Forming 2010" (pp. 516-519).

Bakhshi-Jooybari, M., Elyasi, M., Gorji, A., Mohammad-Alinejad, G., Hosseinipour, S. J., & Nourouzi, S. (2009). Investigation of die corner filling in hydroforming of cylindrical stepped tubes using finite element simulation and experiment. In Key Engineering Materials (Vol. 410, pp. 335-343). Trans Tech Publications.
 

Loh-Mousavi, M., Mori, K., Hayashi, K., & Bakhshi, M. (2007). Improvement of filling of die corners in box-shaped tube hydroforming by control of wrinkling. In Key Engineering Materials (Vol. 344, pp. 461-467). Trans Tech Publications.